Buel® G
The BUEL® Model G is a new family member of the DELLNER BUBENZER brand BUEL®. It is a compact thruster to feed active or passive hydraulic brakes and emergency brakes. It is also suitable for small capacity hydraulic cylinders. Operational pressure can be up to 250 bar.
- Compact design
- Fail safe principle
- Variable tank capacity, small filling quantity
- Use of bio-degradable oils possible
- Redundant valve system
- Energy saving by limited duty cycle
- Automatic compensation of pressure losses, by short time actuation
- Hydraulic parts protected inside the housing
- 2 pressure outlets
- Internal generation of the control voltage for valves and sensors
- Overload protection by monitoring of the working pressure
- External manual release incl. “dead-man-handle”
- Integrated bursting pressure protection
- Options for additional functions and monitoring
Electrical design All BUEL® thrusters are operated with 3-phase voltages between 220 V to 690 V @ 50 Hz or 60 Hz.
Protection class All electric components of the BUEL® thrusters are located inside, for best protection against environmental influences. BUEL® thrusters are rated IP 65. Protection class IP 67 is possible as an option.
Operating modes BUEL® Model G thrusters are designed for intermittent duty, independently from the required operating mode of the drive installed. There is no limitation of duty cycle. The motor is switched off after reaching the working pressure. In case the working pressure is not reached within 4 seconds, the motor is switched off internally.
Ambient temperature range BUEL® thrusters are suitable for ambient temperatures between -30°C to +60°C. For deviating ambient temperatures, please contact us for support.
Protection against moisture For applications in maritime or tropic environments, the optional use of a small heater to protect the motor windings from moisture is recommended.
Heater voltages can be:
- 110 to 120 V AC 50 Hz or 60 Hz
- 220 to 240 V AC 50 Hz or 60 Hz
Hydraulic media BUEL® Model G thrusters are filled with a high performance synthetic oil, type Fuchs Titan CHF 11S. This oil insures a trouble-free operation in the entire temperature range, indicated above.
Biodegradable oils can be used as an option.
Additional PRODUCTS
- All
- Caliper / Disc Brakes
- Components & Accessories
- Couplings
- Drum & Band Brakes
- Hydraulic Systems
- Locking Devices
- Monitoring & Control Systems
- Motor Mounted Brakes
- Pneumatic Drum Clutches & Brakes
- Stop Turn Lock Systems
- Storm Brakes (Rail & Wheel Brakes)
- Thruster / BUEL®
- Wind Turbine Components
- WPT Disc Clutches & Brakes
Half Wave & Full Wave rectifiers for Din rail or panel mounted rectification.
Gas-hydraulic buffers are installed as impact energy absorber on crane gantries, trolleys, elevators, stackers, reclaimers and other industrial equipment.
Protective element to be connected parallel to the output of the rectifiers BGL, EGL and SGL to increase the interurruption capacity
Din rail mounted unit switches from bridge rectification to half-wave rectification
WPT Low Inertia Brakes are suited for high cycle applications or general brake duties. These heavy duty brakes afford increased precision for your processes with minimal part movement during start and stop, acceleration time is decreased leading to more cycles per minute.
WPT Low Inertia Clutches and Brakes are suited for high cycle applications or general clutch/brake duties.
WPT Low Inertia High Torque Clutches are suited for high cycle applications or general clutch duties.
This flywheel PTO is designed for inline and sideload applications on all internal combustion engines with standard SAE industrial flywheel or flywheel housing dimensions.
WPT Power has engineered the WPT Pilotless™ Mechanical Power Take-off to eliminates the pilot bearing and increases side load capacity over previous generations of PTO products.
WPT Planetary Hydraulic Hoists are ideal for applications in the oil & gas, utility, and crane industries. WPT’s hoist designs adhere to SAE J706 standards and provide lifting capacities of 8,000 lbf and 12,000 lbf, respectively.
WPT Planetary Hydraulic Winches provide fast line speed and consistent, powerful pull capacity.
WPT® Power Grip clutches are designed to accommodate in-line and shaft-to-shaft power transmission applications with large inertia loads.
The WPT® Power Grip PO Clutch is suitable for in-line and shaft-to-shaft power transmission applications.
The WPT® Type 2 Hydraulic Power Take-Off utilizes large spherical roller bearings designed for heavier duty sideload capacity.
WPT® water cooled brakes (WCBs) are high energy absorbing solutions used as dynamic tensioning and static holding brakes.
WPT Worm Gear Winches are offered from 9,000 lbf to 20,000 lbf, with options of hydraulic or electric operation.