Buel® H
The BUEL® Model H is a family member of the DELLNER BUBENZER brand BUEL®. BUEL® thrusters are used for almost all kind of industrial applications. They are setting new industry standards for disk and drum brakes as well as wheel brakes.
- New technology
- Pressure generation by centrifugal gear pump with high mechanical efficiency
- Fast setting times
- Energy saving by intermittent duty
- Fail safe principle
- Redundant valves
- Compact dimensions
- Terminal box with control board
- Automatic pressure drop compensation
- Low heat generation
- Huge temperature range in standard execution
- Little oil volume
- Little ecologic risk
- High protection category
- Infinitely variable setting time
- Swivel head for shear force and misalignment compensation
- Unique design for the complete model range
- Low weight, excellent mass/performance ratio
Electrical design All BUEL® thrusters are operated with 3-phase voltages between 220 V to 690 V @ 50 Hz or 60 Hz.
Protection class All electric components of the BUEL® thrusters are located inside, for best protection against environmental influences. BUEL® thrusters are rated IP 65. As an option, protection class IP 67 is possible.
Operating modes (BL 35-5 to BL 600-8) BUEL® thrusters are designed for intermittent duty, independently from the required operating mode of the drive installed. Any limitation of the duty cycle is not required. After reaching the end position (brake released) the motor is switching off. In case the end position is not reached within 4 seconds, the motor is switched off internally.
Ambient temperature range BUEL® thrusters are suitable for ambient temperatures between -30°C to +60°C. For deviating ambient temperatures, please contact us for support.
Protection against moisture For applications in maritime or tropic environments, the optional use of a small heater to protect the motor windings from moisture is recommended.
Heater voltages can be:
- 110 to 120 V AC 50 Hz or 60 Hz
- 220 to 240 V AC 50 Hz or 60 Hz
Hydraulic media BUEL® Model H thrusters are filled with a high performance synthetic oil, type Fuchs Titan CHF 11S. This oil insures a trouble-free operation in the entire temperature range, indicated above. Biodegradable oil is available as an option.
Installation positions All BUEL® thrusters are preferably operated vertically (piston rod ontop). A deviation of +/- 30° from the vertical axis is permitted. A horizontal installation is possible as an option (please indicate with the order).
Additional PRODUCTS
- All
- Caliper / Disc Brakes
- Components & Accessories
- Couplings
- Drum & Band Brakes
- Hydraulic Systems
- Locking Devices
- Monitoring & Control Systems
- Motor Mounted Brakes
- Pneumatic Drum Clutches & Brakes
- Stop Turn Lock Systems
- Storm Brakes (Rail & Wheel Brakes)
- Thruster / BUEL®
- Wind Turbine Components
- WPT Disc Clutches & Brakes
Half Wave & Full Wave rectifiers for Din rail or panel mounted rectification.
Gas-hydraulic buffers are installed as impact energy absorber on crane gantries, trolleys, elevators, stackers, reclaimers and other industrial equipment.
Protective element to be connected parallel to the output of the rectifiers BGL, EGL and SGL to increase the interurruption capacity
Din rail mounted unit switches from bridge rectification to half-wave rectification
WPT Low Inertia Brakes are suited for high cycle applications or general brake duties. These heavy duty brakes afford increased precision for your processes with minimal part movement during start and stop, acceleration time is decreased leading to more cycles per minute.
WPT Low Inertia Clutches and Brakes are suited for high cycle applications or general clutch/brake duties.
WPT Low Inertia High Torque Clutches are suited for high cycle applications or general clutch duties.
This flywheel PTO is designed for inline and sideload applications on all internal combustion engines with standard SAE industrial flywheel or flywheel housing dimensions.
WPT Power has engineered the WPT Pilotless™ Mechanical Power Take-off to eliminates the pilot bearing and increases side load capacity over previous generations of PTO products.
WPT Planetary Hydraulic Hoists are ideal for applications in the oil & gas, utility, and crane industries. WPT’s hoist designs adhere to SAE J706 standards and provide lifting capacities of 8,000 lbf and 12,000 lbf, respectively.
WPT Planetary Hydraulic Winches provide fast line speed and consistent, powerful pull capacity.
WPT® Power Grip clutches are designed to accommodate in-line and shaft-to-shaft power transmission applications with large inertia loads.
The WPT® Power Grip PO Clutch is suitable for in-line and shaft-to-shaft power transmission applications.
The WPT® Type 2 Hydraulic Power Take-Off utilizes large spherical roller bearings designed for heavier duty sideload capacity.
WPT® water cooled brakes (WCBs) are high energy absorbing solutions used as dynamic tensioning and static holding brakes.
WPT Worm Gear Winches are offered from 9,000 lbf to 20,000 lbf, with options of hydraulic or electric operation.