DELLNER BUBENZER

DBSZ

DBSZ

Holding Force:
Up to 800 kN (higher force on request)

These rail clamps are storm brakes static suitable for small to medium forces. They are spring actuated; the spring exercise the closing force while an hydraulic cylinder fed by a suitable hydraulic unit provides the opening.

  • Holding force up to 800 kN
  • Vertical float = ± 7,5 mm (to be checked)
  • Horizontal float = ± 30 mm
  • Rail tolerance= ± 1,5 mm
  • Opening time = 4 seconds
  • Adjustable closing time (4 ÷ 12 s)
  • Easy maintenance
  • Emergency manual opening device
  • Hand Pump
  • Working temperature different from standard (-20°+40°)
  • Double side flanges or upper flange (with hydraulic unit supplied separately from rail clamps)
  • Flange for buffer fixing
  • Hydraulic unit suitable to operate with more rail clamps
  • Electrical board (on plate or box IP55)
  • Limit switch which signals "rail clamps closed”
  • Mechanical limit switch instead of inductive
  • Wider horizontal and vertical float
  • Security side stowage pins (to be inserted into suitable socket on the quay)
  • Manufacturing according Q.C.P. different from our standard (Nuclear plan or special application)
  • With special teeth for vertical force
  • Language of documentation different from standard
  • Certificates of materials (EN 10204-2.2, EN 10204-3.1 o EN 10204-3.2) for all main components

Additional PRODUCTS

DELLNER BUBENZER's Anti Sway Systems allow the damping of head-block, spreader and container oscillation generated by acceleration / deceleration of trolley and gantry.

BAC

The BAC-brakes is used for stopping and/or holding of fans, blowers, wind turbines, coilers, crane slewing and travel gears etc.

BHB

Band Brake for large torque applications that can be used for emergencies or back up braking needs. Band Brakes have been around for many years and we offer many ways to operate via thruster, air, hydraulic or hand wheel.

The BOSS® system has been developed based on the experience with the SOS system that has been already installed in more than 200 container cranes world wide.

The BCMS-4 is a micro-controller-based monitoring and switching device for spring applied brakes of the SFB and KFB series.

The Brake Control Unit BCU 2001 records characteristic current and voltage variations, which are induced by movements of the armature disk in the magnetic field of the brake coil.

These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane. They are hydraulic powered with HPU or BUEL® G.

Designed for all rail mounted equipment, like cranes, stackers, reclaimers, etc. Direct holding of idle wheels, particularly where rail clamps or rail brakes cannot be used.

The high capacity of these brakes makes them particularly suitable as service- or secondary emergency brakes e.g. on hoists, slewing drives and belt conveyors.

The BUEL® Model G is a new family member of the DELLNER BUBENZER brand BUEL®. It is a compact thruster to feed active or passive hydraulic brakes and emergency brakes.

The BUEL® Model H is a family member of the DELLNER BUBENZER brand BUEL®. BUEL® thrusters are used for almost all kind of industrial applications.

The BUEL® Model S is a brand new family member of the DELLNER BUBENZER brand BUEL®. It is designed for wheel brakes on rail mounted cranes, where high pulling forces for mechanical wheel brakes are required.

Compact status monitoring system for a brake system with display and fieldbus interface.

Compact status monitoring system for a brake system with display and fieldbus interface.

Compactus is a pneumatically operated hydraulic pump system that multiplies pneumatic line pressure into hydraulic pressure that is sufficient to operate pressure applied disc brakes at rated capacity.

These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane.

These brakes are for parking utilization, securing the crane against the wind force. In emergency condition they can be operated also as dynamic brakes to stop the crane.

DELLNER BUBENZER's DBSB is a storm safety brake for all rail mounted equipment, e. g. cranes, stackers, reclaimers etc.