DELLNER BUBENZER

WPT Low Inertia Clutch

WPT Low Inertia Clutch

WPT Low Inertia Clutches and Brakes are suited for high cycle applications or general clutch/brake duties. With minimal part movement during start/stop, acceleration time is decreased leading to more cycles per minute. Designed for end-shaft mounting, typically on a flywhee

  • Pneumatically applied and spring released
  • Fast engagement and disengagement air <> pressure design
  • Minimal adjustment required
  • Controlled slipping and high cycle operations
  • High cycle life
  • Predictable preventative maintenance
  • Hydraulic actuation available
  • Slotted, solid and ventilated center plates available

Additional PRODUCTS

Gas-hydraulic buffers are installed as impact energy absorber on crane gantries, trolleys, elevators, stackers, reclaimers and other industrial equipment.

Protective element to be connected parallel to the output of the rectifiers BGL, EGL and SGL to increase the interurruption capacity

Half Wave & Full Wave rectifiers for junction box mounting.

Din rail mounted unit switches from bridge rectification to half-wave rectification

WPT Low Inertia Brakes are suited for high cycle applications or general brake duties. These heavy duty brakes afford increased precision for your processes with minimal part movement during start and stop, acceleration time is decreased leading to more cycles per minute.

WPT Low Inertia Clutches and Brakes are suited for high cycle applications or general clutch/brake duties.

WPT Low Inertia High Torque Clutches are suited for high cycle applications or general clutch duties.

This flywheel PTO is designed for inline and sideload applications on all internal combustion engines with standard SAE industrial flywheel or flywheel housing dimensions.

WPT Power has engineered the WPT Pilotless™ Mechanical Power Take-off to eliminates the pilot bearing and increases side load capacity over previous generations of PTO products.

WPT Planetary Hydraulic Hoists are ideal for applications in the oil & gas, utility, and crane industries. WPT’s hoist designs adhere to SAE J706 standards and provide lifting capacities of 8,000 lbf and 12,000 lbf, respectively.

WPT Planetary Hydraulic Winches provide fast line speed and consistent, powerful pull capacity.

WPT® Power Grip clutches are designed to accommodate in-line and shaft-to-shaft power transmission applications with large inertia loads.

The WPT® Power Grip PO Clutch is suitable for in-line and shaft-to-shaft power transmission applications.

The WPT® Type 2 Hydraulic Power Take-Off utilizes large spherical roller bearings designed for heavier duty sideload capacity.

WPT® water cooled brakes (WCBs) are high energy absorbing solutions used as dynamic tensioning and static holding brakes.

WPT Worm Gear Winches are offered from 9,000 lbf to 20,000 lbf, with options of hydraulic or electric operation.